The special Solder aluAgent (formerly AL85PLUS of RSI) connects all ALS and Gußaluminium-alloys in the case of an operating temperature of 380 °C /° C 420, without added and Flussmitteleinsatz./or by the low operating temperature, there is no, or only limited delay on Werkstück. aluAgent (formerly AL85PLUS of RSI) can be safely used in enclosed spaces, even in the absence of even Hide wires toxic additives or flux! Easy to use: it is not a special training and no Spezialgerät need. Quick and Easy to apply. possible Wiedertrennen the workpieces or by warming to temperatures of approximately 380 °C , can be used on a variety of sources: Propane or Butane Torches, Laser Industrieföhn etc., 1 m Wire can be up to 10 m Weld fact, uses car, motorcycle, model making, Oldtimer, industrial, general repairs, Drilled, milled, twisted or threaded, sealing cracks and holes, or by modelling Verbohren Fräsfehlern, can be polished and lacquered Technical information: Tensile strength: 2.3 to 2.6-Way Aluminium Brinell hardness: (HBW 2.5 / U), the mean 93 to 113 according to DIN EN ISO 6506-1 expansion glasses: up to 6% operating temperature: 180 °C ‑ 420 °C TÜV-certification test: B 10-01760 a / B: Germany, the country of manufacture on the use of the application shall be clear and easy heat three first Schritten. 1 Piece, the operating temperature of 380 °C ° C ‑ 420 be achieved because of wire should have the temperature of the workpiece for melting are not by direct burn Solder then apply if 2 Solder the hand. thoroughly in the relevant field, avoiding always ensure that the wire through the workpiece is heated instead of directly by the flames of Brenners. 3. Oxidschicht the opening of the third step Oxids
