Klann Düsenauszieher kit Universal with accessories Universal suitable for diesel engines with injection nozzles-connection thread M14 x 1.5 (External thread) or M17 x 1 (Internal Thread). This tool enables the removal of very stuck injectors in the vehicle, and without having to remove the cylinder head The use of a special sharpening Bridge and the use of the feed shaft enable the injector easily removed quickly and easily.
The support the sharpening Bridge is carried out either from the support bolts which can be screwed into the threaded holes of the valve cover mounting screws (M6) or the support strip which on a smooth surface on the cylinder head night. The distance nuts allow height adjustment the support surfaces and the balance and the support bolts with drill holes with less depth.
Can be used high time and cost savings, professional and precise removal of the injector and all the items as spare parts.
Box Contents: ‘sharpening Bridge without spindle, flange nut M16 x 1.5, feed shaft M17 x 1, 200 mm in length, spindle M14 x 1.5, 127 mm long, special bit SW10, special socket wrench insert sw29 1/2 inch drive set (set of 4), 1 each of distance 5 mm, 10 mm, 15 mm – Support groin/set (2 pieces), plastic case.
Attention. This tool can have a delivery time of 2 – 3 weeks.
- Special tool spark plugs/Glow Plug
- Attention. This tool can have a delivery time from 2 to 3 weeks.
- ‘Klann Düsenauszieher set universal with universal suitable for diesel engines with injection nozzles-connection thread M14 x 1.5 (Male Thread) or M17 x 1 (inner thread). This tool allows for the removal very tightly injection nozzles in the vehicle and the Cylinder Head Thanks to the use a special removable Bridge and simply by pulling out the use of the feed shaft the injector can easily and quickly. The sharpening support bridge can be either the support bolts that in which are screwed (M6) threaded holes of the valve cover mounting screws or the cylinder head support fly information on a smooth surface on the night. The distance nuts ensure a height adjustment of the support surfaces and the Ausgleich support bolt for Bohrungen as low and depth. – universally applicable – High Time and Cost savings – Professional and precise removal of the injector – All items available as spare parts box contents: removal Bridge without spindle nut M16 x 1.5, feed shaft M17 x 1, 200 mm in length, Spindle M14 x 1.5, 127 mm long, special bit SW10, special socket spanner Insert SW29 1/2 Drive, 1 distance nut set (set of 4) 5 mm, 10 mm, 15 mm, Support Line Set (2 pieces), plastic case.