Input voltage: DC 10-40V
Output voltage: DC 0-38V
Output current: 0-6A
Conversion efficiency: 92%
Working frequency: 150KHz
Short circuit protection: constant current
Operating temperature :﹣40℃~+85℃
Control method: numerical control + digital tube display
Voltage regulator/display resolution: 0.01V
Minimum resolution of power display: 0.001W
Current regulator/display resolution: 0.001A
Minimum resolution of capacity display: 0.001AH
Output ripple: ≤50mV
1. Adopts advanced microprocessor, can regulate output voltage and current accurately;
2. Can step up and step down the voltage;
3. All display by digitals, convenient and easy to use;
4. Has constant voltage and constant current statue;
5. Uses 4 digits high brightness LED, can display output voltage, current, power and capacity and other parameters;
6. Voltage, current, power, capacity and other parameters can be switched to display automatically or manually;
7. Has output OUT, constant voltage CV and constant current CC indicators;
8. Can be set whether to output automatically when power on;
9. The set voltage and current values can be saved by key;
10. Has memory saving function, can store 10 groups of parameters and they can be freely stored and called out;
11. The maximum input current is 8A under step up mode, when the output voltage is much larger than input voltage, the output current may not be up to 6A.
1 X Numerical Control Boost Buck Converter
- It’s a fully digital display numerical control CC CV step up step down module, which adopts advanced microprocessor, can regulate output voltage and current accurately, has high efficiency and stable performance; the input voltage can be lower or higher than the output voltage, also can be the same as the output voltage.
- The module has two kinds of modes: simple mode and fully functional mode(simple mode by default); Uses 4 digits high brightness LED, can display output voltage, current, power and capacity and other parameters; Has OUT, CC, CV indicators and memory saving function, can store 10 groups of parameters and they can be freely stored and called out.
- Simple mode: after setting the voltage and current values, pressing “OK” the module will output, then use the “↑” “↓” buttons to increase or decrease the value. At output statue, short press “ok” to switch between voltage and current display, long press for 3 seconds to turn on/off the function of displaying volt and amp in turns.
- Under fully functional mode, there are three special functions: 0. output automatically when power on; 1. Save and call out the parameters, display power and capacity; 2. Take turns to show the parameters after output automatically. you can open them by yourself.
- Perfect for electronic hobbyists and suitable for wind power, DC generator, solar panels to charge battery, you can also make your own power supply to power up devices; Please connect wires correctly or the module will be damaged and please enhance heat dissipate when the output current is over 5A.