Image sensor: PC3030
Pixel: 756 * 720
Image Format: NTSC / PAL
Diagonal Angle: 170 degrees
Rated voltage: DC12V
Protection class: IP67
Dimensions with bracket : approx.24mm x 29mm x 38mm
Dimensions only camera : approx.18mm x 18mm x 22mm
NOTE:Suitable for the 12V vehicle electrical system ,can not be installed on the 24V electrical system car
Use the hole driller to mount the camera at the back of the car (on the license plate back window or other suitable place)
Connect the power of the camera to your reverse lights – red wire to positive and black wire to negative.
Connect the video cable of the camera to the extension cord.Connect the extension cord to your car monitor.
You will see the images when your car is in reverse shift.
1 x Car Rear View Camera
1 x 6M Video Cable
1 x 1.5M Power Cable
2 x Screws
- Using CCD digital fill light image sensor , specifically for automotive rear-view design, the use of digital technology and software fill light, clear image at daytime and low lighting luminance at night; Large Viewing Angle 170 ° range, reversing safer;
- -30 ℃ to +60 ℃ temperature range of applications, in full compliance with the automotive environment applications; With reversing reference line (electronic ruler line), obstacle distance glance;
- Digital photographic processing chip, night vision effect is obvious; Factory after the high voltage electric immersion test and 12 hours aging test, multi-layer waterproof design, truly waterproof high pressure washing and soaking;
- Mounted on the rear handle and license plate lights with self-tapping screws; Video cable connected to the monitor, connect the power cord to taillights power, when reversing, reversing monitoring system work automatically, you can clearly see the rear situation.
- We Ship from China，delivery takes 15-25 days